Petzl PROGRESS ADJUST-I adjustable positioning lanyard

Petzl PROGRESS ADJUST-I adjustable positioning lanyard

Thanks to the ADJUST rope adjuster, you can quickly and easily adjust the lanyard’s length. Furthermore, the CAPTIV ADJUST and STUART accessories help hold the connectors in a good position, making clipping an easy task. Depending on the configuration, you can use the lanyard in either single or double mode. We make the PROGRESS ADJUST-I positioning lanyard available in three distinct lengths: 2 meters, 3 meters, and 5 meters.

• Adjustable positioning lanyard, that when combined with a fall-arrest device, enables comfortable positioning at a workstation when the user has support for the feet. Subsequently, operating the rope adjuster while holding the free end of the lanyard, adjusts the length when the system is not under load.
• Can be used in two ways:
  • used in single mode with the ADJUST rope adjuster on the harness ventral attachment point, when the anchor is located above the user, so that the load is comfortably distributed between the waistbelt and leg loops
  • used in double mode on the harness side attachment points. This type of attachment ensures better load distribution on the belt.
• Easy handling:
  • very quick and precise length adjustment, thanks to the ergonomic shape of the ADJUST rope adjuster
  • easy clipping, with the STUART accessory that helps keep the connector in the correct position.
  • CAPTIV ADJUST positioning bar helps hold the ADJUST rope adjuster in the proper position and keeps the lanyard and rope adjuster integrated with the carabiner (1)
• Durability:
  • individual identification marking on the plastic sheath, for tracking the equipment throughout its lifespan
  • protective sheath protects the rope from abrasive surfaces and enhances rope glide. Alternatively, remove for single mode use to allow the user to get up closer to the anchor.
• Dynamic rope lanyard to limit the impact force transmitted to the user in the event of a short fall
• Available in three lengths: 2, 3 and 5 m. The marking on the end-stop sleeve identifies the rope length.

(1) Compatible with OK, Am’D, Bm’D and OXAN connectors

Petzl PROGRESS ADJUST-I Specification

• Material(s): Aluminum, nylon, polyester, high-modulus polyethylene (HMPE), elastomer
• Certification(s): CE EN 358, UKCA, EAC, ANSI Z359.3, CSA Z259.11